Sales Hot-line:
+86-0769-86780883
Sales Hot-line:
trade news
Before coating, load a clean and well tensioned screen from the front of the coating machine. Some models can also load the screen from the side. In models designed for large format mesh frames, side mounting is more common because the mesh frame is large and bulky, and side mounting can reduce the amount of lifting and moving. When the automatic screen coating machine is running online with other automatic screen processing equipment, such as cleaning equipment, regeneration equipment, drying devices, and developing machines, it is more convenient to mount plates from the side. Regardless of how the screen is installed, once the screen is in the correct position, the pneumatic or mechanical clamping device closes, locking the screen. In order to make operation more convenient, many models have foot pedals to control the clip movement, allowing operators to free up their hands to control the screen version. After installing the screen plate and pouring the corresponding photosensitive emulsion into the automatic coating machine, coating can begin. According to the functions of the control system and equipment, the equipment can simultaneously coat both sides of the screen.
日期：2023-04-03Automatic slitting machine is a commonly used industrial automation equipment, widely used in industrial production. However, during the use process, some common problems inevitably arise with automatic slitting machines. Next, the slitter manufacturer will analyze the common fault types, symptoms, and solutions of the automatic slitter from three aspects
日期：2023-03-27The rewinder can be used to produce various types of tape, such as transparent tape, colored tape, double-sided tape, and so on. Generally, the production of adhesive tape requires the use of a tape slitter to strip the parent roll into small rolls of the required width, and then send them to a rewinder for rewinding processing.
日期：2023-03-27If the fully automatic slitter stops for a long time, all bright surfaces must be wiped clean, coated with rust preventive oil, and the entire machine covered with a plastic cover. So, do you know the process requirements for operating the slitter? Let's take a look together with the slitter manufacturer!
日期：2023-03-20The automatic slitting machine is suitable for slitting various rolled materials such as BOPP, CPP, CPE, PVC, aluminum foil, paper, etc. During the production process, materials are trimmed and slit according to different needs. Machine failures are common problems. Below, you can work with the slitter manufacturer to learn about common fault analysis and operating procedures.
日期：2023-03-20We know that when the variable frequency governor works at low frequency, the characteristics of the interchangeable multi-thread motor of the laminating slitter are not very good, and the excitation torque is low and fractal, so in all winding processes, the winding motor should be reduced in the work below 2HZ as much as possible. Therefore, the winding motor has a lower speed limit. The angle of contact tangent between blade and drum is generally between 15 ° and 30 °. If the angle is too large, the scraper simply rests on the drum, and the appearance of the drum is not smooth. When running at high speed, it will cause the vibration or jump of the elastic blade, make the solution rebound, form an uneven coating amount, and cause the difference in coating amount.
日期：2023-03-06The so-called automation of slitter equipment is mainly reflected in the feeding, shearing system and shearing part. Both the feeding and discharging are equipped with storage racks, while the shearing system is a PLC control system. Its function is to record and display the current working parameters and status, as well as the memory and storage of material parameters, hot rolling faults and other powerful functions. Most users will encounter some common phenomena when using the blades of polarizer slitting machine, which will reduce the efficiency of the machine and reduce the whole working process. Let's look at the specific situation and how we should adjust it. Strip steel metal coils, such as strip steel, stainless steel, copper... are mainly used in steel processing plants, steel market operators, steel rolling manufacturers, electrical industry, automobile, stamping parts, etc. Due to the high accuracy of the stripper in the process of manufacturing and assembly, it is impossible to select the motor with large power in the process of processing and assembly, but it is not considered.
日期：2023-03-06The slitter adopts spring pressure, and the paper pushing adopts slider structure. The structure is simple and the debugging and maintenance are convenient, but the paper pressure is low and the cutting accuracy is poor, which can not meet the requirements of cutting accuracy for advanced printing, and also can not meet the requirements of medium and high-end packaging printing products. When selecting the cutting machine, you should select it according to the actual situation of the products you want to process. According to the high-speed operation of the round knife, the original waterproof material is divided into multiple rolls of narrow waterproof material. The slitting method of the adhesive slitting machine is widely used in the adhesive product manufacturing industry. Inclination correction equipment shall be installed on the slitting machine to make as few modifications as possible to the existing equipment and put forward clear corrective measures.
日期：2023-02-28
XW Subscriptions
Address：Damaoling,Dongping Village,Qishi Town,Dongguan City,Guangdong Province,China
Website：www.www.jnhcdp.com
Tel：+86-769-86780883
Fax：+86-769-86736139
After-sales service hotline:+86-769-86738139
Email:xinwang03@www.jnhcdp.com.cn
Foreign Trade Department(Cellphone Contact):
Mr.Simon Luo:+8613509819098(Sales Director)
Mrs.Polly Pan:+8613925825327
Mrs.Dana Dai:+8613926851810
Consulting